Logo
Submit a request
Sign in
  1. motivity.net
  2. Collecting and Viewing Data
  3. Reports and Charts

Articles in this section

  • Event Lines vs. Phase/Condition Lines
  • Y-Axis Options
  • Graphing Rate (Toggle Feature)
  • Split Graph by Staff/Data Collector
  • Accessing Cumulative Graphs
  • Accessing Simulated Graphs
  • See history of a program (when created, library source and who and when last edited)
  • Exporting Data (Session Note Reports, Session Reports, Learner Data)

Y-Axis Options Follow

There are three options for the y-axis on graphs. 

1. Auto 

The "Auto" option adjusts the y-axis to start at the lowest data point in your data set and end at the highest point + one row. 

For example, in the picture below the data ranges from 50%-100%. The y-axis in auto starts at 50% and goes to 100% with an extra row above. 

y-axis_auto.png

 

2. 0-Auto 

The "0-Auto" option will adjust the y-axis to start at zero and end at the highest point + one row. 

For example, in the picture below the data ranges from 50% -100%. In 0-Auto the y-axis will start at zero and end at 100% with and extra row above. 

y-axis_0-auto.png

 

3. 0-100

The "0-100" option will adjust the y-axis to start at zero and end at 100. 

For example, in the picture below the data ranges from 50% -100%. In 0-100, the y-axis will start at zero and end at 100% with no extra rows. 

y-axis_0-100.png

If you do not manually select an option, the graph will default to the Auto setting. 

Last Reviewed: 8/16/22

  • Facebook
  • Twitter
  • LinkedIn
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request
Return to top

Related articles

  • Graphing Rate (Toggle Feature)
  • Event Lines vs. Phase/Condition Lines
  • Print Paper Data Sheet
  • Timeline Filter
  • Printing Graphs

Copyright © motivity.net. All rights reserved.

Zendesk Theme Designed by Diziana